Ruggedized singlemode multi-channel fiber optic cables designed for multiple deployments for field production in outside broadcast, rental houses and more.
Highly flexible tight-buffered tactical cables with internal aramid strength members for crush resistance in high traffic areas if handled properly and a polyurethane outer sheath designed to withstand crushing by both Military Tanks and Outside Broadcast vehicles.
Cables are complete end-to-end tactical grade where fanout channels are covered with tactical grade polyurethane furcation tubing. All assemblies multi-stage machine polished and tested for less than .
55db RL (complete per-channel test results available on request). Each reel has been carefully selected to ensure proper support and critical bend radius required by fiber optic cables.
We recommend tactical fiber optic cables over 25 feet be stored on a cable reel.
Custom configurations and assemblies as well as full repair services are always available for tactical or hybrid fiber cable.
Single Mode Optic Fiber Description
The optical fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastic(FRP)are placed at two sides. A steel wire as additional strength member is also applied.Then the cable is completed with block or color LSZH sheath.
Single Mode Optic Fiber Characteristic
1.Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property;
2.Two parallel FRP strength members ensure good performance of crush resistance to protect the fiber;
3.Single steel wire or massagers as the additional strength member ensures good performance of tensile strength.
4.Simple structure,light weight and high practicability;
5.Novel flute design,easily strip and splice,simplify the installation and maintenance;
6.Low smoke,zero halogen and flame retardant sheath.
SM Optic Fiber Characteristics
| Type | G.652D | G.657A | 50/125μm | 62.5/125μm | |
| Attenuation(+20℃) | @850nm | ≤3.0dB/km | ≤3.5dB/km | ||
| @1300nm | ≤1.5dB/km | ≤1.5dB/km | |||
| @1310nm | ≤0.40dB/km | ≤0.35dB/km | |||
| @1500nm | ≤0.30dB/km | ≤0.25dB/km | |||
| Bandwidth(Class A) | @850nm | ≥500Mhz.km | ≥200Mhz.km | ||
| @1300nm | ≥1000Mhz.km | ≥600Mhz.km | |||
| Numerical Aperture | 0.200±0.015NA | 0.275±0.015NA | |||
| Cable Cut-off Wavelength λcc | ≤1260nm | ≤1480nm | |||
SM Optic Fiber Parameters
| Fiber Count | Cable Diameter(mm) | Cable Weight(kg/km) | Tensile Strength Long/Short Term | Crush Resistance Long/Short Term N/100mm | Bending Radius Static/Dynamic mm |
| 1 | (2.0±0.2)×(5.0±0.2) | 20 | 60/120 | 300/1000 | 15/35 |
| 2 | (2.0±0.2)×(5.0±0.2) | 20 | 60/120 | 300/1000 | 15/35 |
| 4 | (2.0±0.2)×(5.5±0.2) | 21 | 60/120 | 300/1000 | 15/35 |
| 6 | (2.0±0.2)×(6.0±0.2) | 22 | 60/120 | 300/1000 | 15/35 |
FO Cable Specifications Performances
| Cable Count |
ITEM | CABLE OD.mm(a) |
S.S.T. OD.mm(b) |
T.B.O.F. OD.mm(C) |
| 4F | 4.5MM | Φ4.5±0.2 | Φ2.4±0.02 | Φ0.5 |
| 6F | 4.5MM | Φ4.5±0.2 | Φ2.6±0.03 | Φ0.5 |
| 8F | 5.0MM | Φ5.0±0.2 | Φ2.8±0.05 | Φ0.5 |
| 10F | 5.0MM | Φ5.0±0.25 | Φ3.0±0.05 | Φ0.5 |
| 12F | 5.5MM | Φ5.5±0.25 | Φ3.2±0.05 | Φ0.5 |
| 24F | 7.0MM | Φ7.0±0.3 | Φ4.3±0.05 | Φ0.5 |
| Cable Count |
ITEM | CABLE OD. mm(a) |
CABLE WEIGHT (kg) |
MAXIMUM TENSILE | BEND RADIUS* | L.P. N/100mm |
||
| S.T. | L.T. | Dyn. | Sta. | |||||
| 4F | 4.5MM | Φ4.5±0.2 | 26.5 | 800 | 400 | 70 | 35 | 3000 |
| 6F | 4.5MM | Φ4.5±0.2 | 38.5 | 1000 | 500 | 100 | 50 | 3000 |
| 8F | 5.0MM | Φ5.0±0.2 | 33.0 | 1000 | 501 | 100 | 50 | 3000 |
| 10F | 5.0MM | Φ5.0±0.25 | 36.0 | 1000 | 502 | 120 | 60 | 3000 |
| 12F | 5.5MM | Φ5.5±0.25 | 39.0 | 1200 | 600 | 150 | 75 | 3000 |
| 24F | 7.0MM | Φ7.0±0.3 | 54.0 | 1500 | 750 | 170 | 85 | 3000 |
• Apply for CATV, LAN, Telecom network, test equipment
• CATV
• Telecommunication networks
• Active device termination
• Metro
• Local Area Networks(LANs)
• Test equipment
• Premise installations
